Skip to main content

Update to 10.1.1 Issues

Posted by CarstenR on Thu, 05/14/2020

Hello,

We upgraded to the newest 10.1.1 version yesterday and noticed quite a few changes. I have some questions/issues, hopefully we can try to work through them.

Connect worked before the upgrade and now it is no longer able to register to the PBX. On Windows 10, it is connecting to the messaging server, but is saying "no connection with telephony server. Calls via PBX are disabled.

The updated android app gives me a sign in error: Critical error occurred, error code 23 now. This was working before the upgrade as well.

Using the launcher via the configuration manager gives me the following error: An error occurred during signing in. The error code: USER_DATA_LOADING_FAILED.

I've verified the Network Topology and am able to register a SIP phone via UDP, but not TCP. All options are set in Network Topology, TCP, UDP, TLS.

With the SIP phone, when I make an outbound call it connects, but then drop about 8-10 seconds after the call is established. Also was not happening before the upgrade. Only have tested outbound at this time for this.

It appears there is now a proxy involved in the middle, so I am no longer seeing any registration attempts to asterisk, so troubleshooting any sort of connection issues is going to be problematic. With the addition of this, what tools do you have in place, or suggest to assist in troubleshooting these things that we used to be able to from the asterisk CLI?

Thanks in advance.


Submitted by volodya on Thu, 05/14/2020 Permalink

If anyone will be getting errors "23" or "USER_DATA_LOADING_FAILED" please make sure that you are running the latest version of the platform.

Submitted by chrisc@accents… on Thu, 05/14/2020 Permalink

The outbound call dropping has affected us as well on a lab system we have to test the new build. We will not be upgrading our production systems until this is resolved. Good luck, so far it's been a challenge for us.

Submitted by CarstenR on Sat, 05/16/2020 Permalink

It looks like I found the issue and they are working on the fix. Until that's been addressed, I can't test any further. I don't think it's specific to my install. There have been some significant changes to the back end.

I wouldn't suggest updating if you are using any sort of SIP trunks that change the host via the contact URI until this is resolved. I will update once everything has been patched and tested.

Submitted by CarstenR on Thu, 05/21/2020 Permalink

Katie,

Support made updates to the Kamailio configuration and we are now able to successfully make outbound calls.