Topic: 407 Proxy Authentication Required [Comments: 2]
jaime@netline.cl

Mon, 03/23/2009 - 16:38 | 407 Proxy Authentication Required

Hi,
I'm trying to setup some DIDs from our SoftSwitch to our MTE box,
but our MTE responds with a 407 Proxy Authentication Required message when is receiving the calls.
our SoftSwitch Support tell us that deactivate this 407 response with a "insecure=very" command.
I'm tryed this command in the sip.conf but the problem with 407 error persists.
Any help would be greatly appreciated.

eeman

Tue, 03/24/2009 - 00:21 | you do it under the channel

you do it under the channel declaration. proxy authentication required is a normal process of sip signalling. so

[somesiptrunk]

host=ip.add.re.ss

more=attributes

insecure=very

disallow=all

allow=ulaw

etc.

Erik Smith
CTO
BluegrassNet Voice
dCAP
Thirdlane Support by BluegrassNet Voice
eeman at bluegrassnetvoice dot com

jaime@netline.cl

Fri, 04/10/2009 - 23:53 | Hi Erik, thanks for the

Hi Erik,

thanks for the help,

I can resolv my issue with your help, I add "insecure=very" to the extra properties of the SIP Trunk in PBX Manager and now works fine.

THanks again.

JCM
jaime at netline dot cl