Skip to main content

407 Proxy Authentication Required

Posted by jaime@netline.cl on Mon, 03/23/2009

Hi,
I'm trying to setup some DIDs from our SoftSwitch to our MTE box,
but our MTE responds with a 407 Proxy Authentication Required message when is receiving the calls.
our SoftSwitch Support tell us that deactivate this 407 response with a "insecure=very" command.
I'm tryed this command in the sip.conf but the problem with 407 error persists.
Any help would be greatly appreciated.


Submitted by eeman on Mon, 03/23/2009 Permalink

you do it under the channel declaration. proxy authentication required is a normal process of sip signalling. so

[somesiptrunk]

host=ip.add.re.ss

more=attributes

insecure=very

disallow=all

allow=ulaw

etc.

Submitted by jaime@netline.cl on Fri, 04/10/2009 Permalink

Hi Erik,

thanks for the help,

I can resolv my issue with your help, I add "insecure=very" to the extra properties of the SIP Trunk in PBX Manager and now works fine.

THanks again.