Topic: How Dial Out 2 Trunks Works [Comments: 3]
raven
Wed, 05/12/2010 - 15:17 | How Dial Out 2 Trunks Works
Can anyone advise how Dial Out 2 Trunks is supposed to work when in Outbound Routes? I figured it would try the first, then go for the 2nd if it received a SIP cause code or timeout. Doesn't appear to be the case, all calls seem to just go straight to the 2nd trunk on the list.
Thu, 05/13/2010 - 00:31 | it tries trunk1 and depending
it tries trunk1 and depending on the results, tries trunk2
Erik Smith
CTO
BluegrassNet Voice
dCAP
Thirdlane Support by BluegrassNet Voice
eeman at bluegrassnetvoice dot com
Mon, 05/31/2010 - 17:49 | hi what is the default
hi
what is the default timeout time? is there any way to modifiy the value ? in the global variable section ?
I mean the timeout time before going on the 2nd trunk
the "how long to ring" does not set the time to wait before trying the 2nd trunk, it set the time before hanging up
thx
Tue, 06/01/2010 - 03:39 | you set the timeout when you
you set the timeout when you set up the trunk.. thats what the box marked 'timout' is for.. duh.
Erik Smith
CTO
BluegrassNet Voice
dCAP
Thirdlane Support by BluegrassNet Voice
eeman at bluegrassnetvoice dot com