Skip to main content

Dropped Calls on New Release

Posted by eherr on Sun, 09/27/2020

Hi All -

I am in the process of manually migrating my ancient thirdlane server to the newest release.

I have had a call on hold for about 20-25 minutes and then the call suddenly dropped. It is a Polycom phone that I use all the time on my production system so I highly doubt it has anything to do with the endpoint side.

It looks like the call cleared out gracefully
[2020-09-27 11:35:49] VERBOSE[20902][C-00000000] bridge_channel.c: Channel SIP/Bandwidth_1-00000000 left 'simple_bridge' basic-bridge
[2020-09-27 11:35:49] VERBOSE[20906][C-00000000] bridge_channel.c: Channel Local/5555@from-inside-testtenant-00000000;1 left 'simple_bridge' basic-bridge
[2020-09-27 11:35:49] VERBOSE[20902][C-00000000] app_macro.c: Spawn extension (macro-tl-ringgroup-base, dial, 2) exited non-zero on 'SIP/Bandwidth_1-00000000' in macro 'tl-ringgroup-base'
[2020-09-27 11:35:49] VERBOSE[20903][C-00000000] res_musiconhold.c: Stopped music on hold on Local/5555@from-inside-testtenant-00000000;2
[2020-09-27 11:35:49] VERBOSE[20902][C-00000000] pbx.c: Spawn extension (Test-ExtensionBased-testtenant, s, 3) exited non-zero on 'SIP/Bandwidth_1-00000000'
[2020-09-27 11:35:49] VERBOSE[20903][C-00000000] bridge_channel.c: Channel Local/5555@from-inside-testtenant-00000000;2 left 'simple_bridge' basic-bridge
[2020-09-27 11:35:49] VERBOSE[20905][C-00000000] bridge_channel.c: Channel SIP/5555-testtenant-00000002 left 'simple_bridge' basic-bridge
[2020-09-27 11:35:49] VERBOSE[20903][C-00000000] app_macro.c: Spawn extension (macro-tl-userexten-rg-base, s, 20) exited non-zero on 'Local/5555@from-inside-testtenant-00000000;2' in macro 'tl-userexten-rg-base'
[2020-09-27 11:35:49] VERBOSE[20903][C-00000000] app_macro.c: Spawn extension (macro-tl-stdexten, s, 14) exited non-zero on 'Local/5555@from-inside-testtenant-00000000;2' in macro 'tl-stdexten'
[2020-09-27 11:35:49] VERBOSE[20903][C-00000000] pbx.c: Spawn extension (from-inside-redir-testtenant, 5555, 1) exited non-zero on 'Local/5555@from-inside-testtenant-00000000;2'
[2020-09-27 11:35:49] VERBOSE[20903][C-00000000] pbx.c: Executing [h@from-inside-redir-testtenant:1] Hangup("Local/5555@from-inside-testtenant-00000000;2", "") in new stack
[2020-09-27 11:35:49] VERBOSE[20903][C-00000000] pbx.c: Spawn extension (from-inside-redir-testtenant, h, 1) exited non-zero on 'Local/5555@from-inside-testtenant-00000000;2'

I did notice with kamcmd ul.dump that the State of the extension/AoR was now showing CS_DIRTY

Once the state went back to CS_SYNC, I could call the extension again.

What do I need to do so the call doesnt drop or is there some setting that needs to be adjusted to prevent the call from dropping?

Thanks!


Submitted by eherr on Sun, 09/27/2020 Permalink

I ran yum make clean and yum update as stated in the docs.

my call has been connected for 61 minutes now and continuing.

However, I can no longer get into the web portal.

Failed to determine Webmin root from SERVER_ROOT, SCRIPT_FILENAME or the full command line

Submitted by volodya on Mon, 09/28/2020 Permalink

Hello,

The call can be dropped by a number of reasons. It would be helpful to look at the SIP packet capture of such a call.

You can look at the rtpholdtimeout setting in the /etc/asterisk/sip.conf configuration file if this happens to the calls on hold.

Please try to restart the Webmin service to resolve the problem with accessing the GUI.

Submitted by eherr on Tue, 09/29/2020 Permalink

I have a few sngrep outputs saved. I am not entirely sure if it was the installation and lack of running yum update or the SIP Provider. Since I ran yum update, I am no longer getting the hangup around that time slice. Testing has not been able to reproduce the issue since then so I am just 'monitoring' it for now.